5 Tips to DIY paving on a budget


Taking care of a patio can be a time consuming and fiscally draining task if not done properly. While many balk at the idea of investing up front for a nice paver patio, they do not realize that by doing so they are actually saving time and money in the long run. Paver patios are quite popular these days because they look classy. In addition, with a paver patio, you do not have to worry about staining or resealing the patio on a regular basis. Should you run into a problem or need to repair part of your patio, you can do so by replacing pieces individually as opposed to resurfacing an entire area. If you are setting out to build yourself a patio be sure to shop for materials at Indian Sandstone. In addition, this article will provide some great tips to help you with the installation.

  • Dig deep. Before you start digging, it is wise to give your local utility company a call to let them know that you are planning a project in which you will need to dig into the ground. The utility company will be able to advise you on digging as there could be cable wires, plumbing, and electrical lines underground that should not be tampered with. Doing so could cause for additional work to be done to fix any damage that occurred before you can begin to dig. To avoid this, it is best to contact the necessary entities first.

Once you have clearance to dig, you will want to check your soil to see if it is dry. If it is dry, be sure to dampen the area so that the dirt softens over night. This will make the digging process easier.

  • Use landscaping cloth. To avoid the overgrowth of weeds coming through your paver stones, be sure to use a landscaping cloth. The cloth will serve as a barrier between the dirt and the new base you will use for your patio. It is advised that you use sand on top of the landscaping cloth to create a base. The sand will also serve as another layer of protection to minimize weeds. You will need to measure your patio area and calculate into square footage. To do so, measure the length by the width and multiply, then add 10 percent. Once you have this calculation, you will be able to purchase the right amount of landscaping cloth for your patio area.
  • Create a solid base. This part can be a bit tricky, but take your time to achieve the best results. You will want to use a wacker plate compactor to pack in the paver base. In order to lay the pavers, it is crucial that you have a solid and level base. To accomplish this, you will need to repack each layer of material that you use on the patio. Attention to detail is very important when creating a solid base.
  • Plan for all types of weather. Make sure that your foundation slopes away from your home slightly so that it allows for water drainage to occur.
  • Keep edges tight. In order to keep your pavers from moving over time, you will want to make sure that your edges are tight and that everything is compact.

 

 


Leave a Reply

Your email address will not be published. Required fields are marked *